I believe there is a gap in the market between BusyBox init and systemd. In particular in the embedded space.
I’m a really bad salesman, and an even worse writer, so instead of trying to convince you with my poor English, I’ve made a demo. It is a Buildroot external that can be used to add Finit to your own projects.
For details, look here: https://github.com/troglobit/br2-finit-demo
- Sane built-in defaults
- Supports runlevels
- Respawns your services (customizable)
- Scriptable nearly everywhere
- Supports service/task synchronization (called conditions)
- Supports PID/systemd/s6 readiness notification
- And more …
Try it Out
First, check your system for the necessary packages to build a buildroot system https://buildroot.org/downloads/manual/manual.html#requirement
Download the demo GIT repo:
git clone https://github.com/troglobit/br2-finit-demo.git
Change to the top directory and fetch all submodules:
cd br2-finit-demo/ git submodule update --init
Configure and Build
make qemu_x86_64_finit_defconfig make
Log in, user
root, empty password
It boots fairly quick provided you have an x86_64 host computer. See
initctl tool to control Finit.
Brings up the available commands. Check what is running right now:
initctl status # default command, you can omit 'status'
Show available .conf snippets that start services:
Try enabling some services (not a lot is enabled in the defconfig, add
make menuconfig or
make busybox-menuconfig) like:
initctl enable telnetd
initctl ls again, it’s now listed in the set of enabled services.
But it’s not yet running … (check with
initctl status). This is
because we may want to roll out multiple changes to a system before
activating them. To activate we tell Finit to reload its configuration.
Verify it is now running. For more detailed information about telnetd:
initctl status telnetd
Try killing telnetd and check the status again. You can now see that
Finit has already restarted it for you (
Restarts: 1 (1/10)). Kill it
a few more times to see what happens. When a service reaches its max
restart count Finit will no longer try to restart it automatically –
something is obviously not right with the service. You will have to
restart it manually, which clears the restart counter. Notice how the
total restarts counter continues counting.
You can connect to the system from your host, or anywhere on the LAN:
telnet localhost 8023
There is of course a lot more to cover. Please get in touch with me if you are curious about some other aspect that would be suitable for a blog post. There is also a discussion forum open for general questions about Finit.