# BSD syslogd in Linux

Some time ago now I was in a meeting with a customer where I first learned of the new syslog standard, RFC5424. I say “new” because, despite it being ten years old, it was new to me.

Three weeks ago I started updating my fork of sysklogd to be RFC5424 compliant. I ended up ripping out most of the old code and replacing it with fresh DNA strands from FreeBSD and NetBSD.

The result is a fully RFC compliant syslogd, and a libsyslog with a replacement syslog.h header for sending RFC5424 events from applications!

https://github.com/troglobit/sysklogd/

When I first embarked on this journey I was very surprised to learn that Linux (GLIBC) did not have an RFC5424 compliant syslog() API. As it turned out, neither did FreeBSD. Only NetBSD had implemented a full stack, from C-library to syslog daemon.

So the libsyslog and syslog.h replacements included now in sysklogd are taken from NetBSD, whereas the major parts of the RFC3164 and RFC5424 parsing code in syslogd are taken from FreeBSD.

## Differences

So what are the main differences between the two RFCs? Well, there are in fact three different standards at play here. The first is the original BSD implementation, which was later sort of standardized in RFC3164, this original BSD is what sysklogd was.

One major difference from the original BSD code and RFC3164, I learned, is that when sending messages to a remote syslog server, there was no timestamp or hostname included. So the receiving syslog server had to look up the host from the source address in the IP header and then also do the timestamping. In some respects this is good (and understandable): 1) early on many hosts did not properly set their hostname, and 2) these same hosts often did not even have the correct time.

The first job of updating sysklogd was to update it to properly support RFC3164 formatting of remote syslog messages:

<------- HEADER --------> <----------- MSG ------------>
Aug 24 05:14:15 192.0.2.1 myproc[8710]: Kilroy was here.
\                \        \      \      \
\                \        \      \      -- What you think is the message
\                \        \      -------- Convention for process ID (PID)
\				 \	      -------------- Convention for process name
\                ---------------------- Hostname or IP address
-------------------------------------- Notice lack of year ...


The second part was to add RFC5424 formatting:

<---------------------- HEADER ------------------------>   <---- MSG ----->
2003-08-24T05:14:15.000003-07:00 192.0.2.1 myproc 8710 - - Kilroy was here.
\                                \         \      \    \ \ \
\                                \         \      \    \ \ -- Actual message
\                                \         \      \    \ --- Structured data
\                                \         \      \    ---- Message ID (MsgID)
\                                \         \      -------- Process ID (ProcID)
\                                \         -------------- Process name (App-Name)
\                                ----------------------- Hostname or IP address
------------------------------------------------------- RFC3339 Timestamp


Yeah, what about those dashes (-)? I had to fake it to begin with, because those dashes, if you disregard the difference in the timestamp, is what are the major differences between the two RFCs. As you can see from the figures above, the RFC3164 world was empty and scary, and the RFC5424 world is full of confusing stuff??

The first dash above is the new MsgID field, which is a free-form string that a receiver can use for quick and easy regexp filtering. The second dash is structured data and is essentially name-value pairs in a [ .. ] container. See the RFC for more details and an example in section 6.3.5

To distinguish between the two formats RFC5424 added a version field that comes right after the <PRI> field, which is at the very start of each syslog message. I.e., RFC3164 starts with <PRI> and a space, and RFC5424 starts with <PRI>1 and a space, before the timestamp.

## NetBSD API

The GLIBC, musl, and uClibc libraries all currently just support RFC3164. So there is no way for a Linux application today to add a MsgID or any structured data to a syslog message … until now.

sysklogd comes with libsyslog and a syslog.h header replacement that has the NetBSD syslogp() family of APIs:

int  setlogmask  (int maskpri);

void openlog   (const char *ident, int logopt, int facility);
void openlog_r (const char *ident, int logopt, int facility, struct syslog_data *data);

void closelog  (void);
void closelog_r(struct syslog_data *data);

void syslog    (int priority, const char *message, ...);
void vsyslog   (int priority, const char *message, va_list args);

void syslogp   (int priority, const char *msgid, const char *sd, const char *message, ...);
void vsyslogp  (int priority, const char *msgid, const char *sd, const char *message, va_list args);

void syslog_r  (int priority, struct syslog_data *data, const char *message, ...);
void vsyslog_r (int priority, struct syslog_data *data, const char *message, va_list args);

void syslogp_r (int priority, struct syslog_data *data, const char *msgid, const char *sd,
const char *message, ...);
void vsyslogp_r(int priority, struct syslog_data *data, const char *msgid, const char *sd,
const char *message, va_list args);


## Example

To use the new API on Linux we create an example application:

/* example.c - Example of how to use NetBSD syslogp() API */
#include <stdio.h>
#include <syslog/syslog.h>

int main(void)
{
openlog("example", LOG_PID, LOG_USER);
syslogp(LOG_NOTICE, "MSGID", NULL, "Kilroy was here.");
closelog();
}


We build and run the application.

jocke@troglobit:~/tmp $gcc pkg-config --libs --static --cflags libsyslog \ -o example example.c jocke@troglobit:~/tmp$ ./example


Provided syslogd is set up properly the following would be logged in your local log file, or sent to a remote syslog server:

2019-11-03T00:46:34.034324+01:00 troglobit example 1234 MSGID - Kilroy was here.